Hack Wi-Fi Using Gerix Wi-Fi Cracker

Hack Wi-Fi Using Gerix Wi-Fi Cracker

Requirements:-

1: A Computer.

2: A Wireless Card capable of packet injection.

3:A Live installation of BackTrack either on a CD or USB stick.

BackTrack Can be found http://www.backtrack-linux.org/downloads/

Create a Live USB Install http://unetbootin.sourceforge.net/

Steps: 

1. boot into BackTrack using vmware

2. Click on the Backtrack applications menu -> Backtrack -> Exploitation tools ->

Wireless exploitation -> WLAN Exploitation -> gerix-Wi-Fi-cracker-ng

3. Go to the configuration menu and select the wireless interface wlan0

-Click on Enable/Disable Monitor Mode (this will put the wireless card into

monitor mode)

-Select the newly created mon0 interface.

4. Now click on the WEP tab at the top of the window. -Click on Start sniffing

and logging and leave the terminal open. -Once the wireless network you want

to crack* shows up it has to be WEP encryption of course select the WEP Attacks

(with clients). *note that the PWR has to be high enough to work so the closer

you can get, the better. -There you click on “Associate with AP using fake auth”,

wait a few seconds and click on “ARP request replay”

5. Once the Data number reaches over 10,000 you are ready to try (if the data is

coming fast wait until 20 or 30,000 to be safe) and crack the key, but don't close

any windows yet. -Go to the cracking tab and click on “Aircrack-ng – Decrypt WEP

password” under Wep Cracking.

Within a few minutes password will be cracked.​

By: Ranjan bawa On 12:56 AM

Continue Reading

How to Hack Wi Fi Using Android

How to Hack Wi Fi Using Android

Hacking of WPA2 WPS Routers

Step 1: Firstly, if your android phone isn't rooted, try to root it, and also make sure that such android phone have a Broadcom bcm4329 or bcm 4330 chipest unlike the Nexus 7, Galaxy S1/S2, Nuxus 1, Htc Desire HD, etc. The presence of Cyanogen ROM on your device can be of use to make the bcmon app work through.


Recommended : Rooted your android device? 


Step 2: Then download and install bcmon, it's essential because it helps monitor mode on your broadcom chipest that helps in the PIN Cracking.


Step 3: After installation, run the app and tap "monitor mode" option.


Step 4: Download and Install Reaver app which helps to crack the WPS Pin to retrieve the WPA2 passphrase.


Step 5: After installation of reaver app, launch it and do an on-screen comfirmation, which is, comfirmint that you're not using it for illegal purpose, then tap the APN or access poin you'd wish to crack and continue. Most times, you might need to verify monitor mode to proceed, and this would cause the bcmon to open again. 


Step 6: Verify your settings and also make sure that you've checked the Automatic Advanced settings" box.



Step 7: Finally, start cracking process by tapping start attack, at this final stage, it can take 2-10hrs for the cracking of WPS to be successful.

By: Ranjan bawa On 10:33 PM

Continue Reading

How To Hack Wi-Fi WPA/WPA2 Password

How To Hack Wi-Fi WPA/WPA2 Password

What We Need to hack Wi-fi Password?

1)Backtrack 5 [ R1 or R2]

2)Compatable Wi-fi Card

So Let's Start... 1st open Terminal and Then Follow My Steps : 

1)In Terminal type : airmon-ng

there we can see interfaces

2)Then type :airmon-ng start wlan0

It must found proceses

3)then we type : airodump-ng mon0

it will start scanning wi-fi networks

4)copy bssid and tpye : airodump-ng -c (channel) -w (file name) --bssid (bssid) mon0

5)type : aireplay-ng -0 5 -a (bssid) mon0

6)click on places home folder drag in terminal wpa-01.cap in terminal and type : aircrack-ng (file Directory) or drag file in terminal

7)type in terminal : aircrack-ng (filename)*.cap -w (dictionary location) And Hit Enter!

Success!

password now has been hacked.... so you can enter and enjoy with hacked wi-fi : ))

By: Ranjan bawa On 7:36 PM

Continue Reading

Wifislax 4.6 (wifi hack tool)

Hi guys, i want to bring you a wifi hack tool. Here´s a short description:

Wifislax is a LiveCD Linux distribution based on SLAX. It is used to perform security audit operations WiFi in all kinds of environments. To start with it, just burn the ISO image to a CD and boot from it.

Wifislax features an impressive assortment of wireless card drivers and auditing tools translated into Spanish. Inside you will find drivers for ipw2200, rt73 and rt61 to ralink, ipw3945, and rtl8187 zd1211rw Zydas (among others).

In terms of tools, you will discover that nothing has been missed Wifislax: comes equipped with aircrack (sp and ng), Dlinkdecrypter, airoscript, Kismet, macchanger, WlanDecrypter, Cowpatty and multiple browsers.

Download Link : 

Wifislax 4.6

By: Ranjan bawa On 8:35 PM

Continue Reading

Wifi Hacking - Cracking WEP

This is actually something I do quite often, so it took my by surprise when I found that no-one had written this before(at least not for windows). Imagine having internet access everywhere for free! There is always some WEP encrypted network close to you.

This one took me quite a long time to write and it takes less than a minute to post a thank you note 

Note: This is only to crack WEP encrypted networks.

Preparations

I will present you with a method to crack WEP encrypted networks. 

A simple but slightly ineffective method. If people are interested, I can make another tutorial on how to do inject packages to speed up the process. But this will do for now.

Credits to: Anne of 'HackCrackForums'

We will need two programs to complete this process. CommView & Aircrack-ng. They are both free to download and use. When installing CommView I suggest you to choose standard install, although you can install VoIP mode if you want to, but let it install the necessary drivers. 

I have provided the download links below:

CommView (http://cur.lv/6hiz7)

Aircrack-ng (http://cur.lv/6hizq)

I suggest you take a minute or two to familiarize yourself with the GUI of CommView. So we will launch CommView now.

Click on Settings -> Options -> Memory Usage.

Change Maximum Packets in buffer to 20,000+ and save changes.

Click on the logging tab.

Tick the Auto-saving button.

Then change 'Maximum Directory Size' to 5,000 and 'Average Log File Size' to 50.

Restart CommView.

If you have more than two wireless adapters in your computer, here is how to switch between them:

Go to Help menu --> Driver Installation Guide --> click on the option (I want to test my untested adapter that may be compatible, and seletect the one you want) --> Next -->close ( restart commview) that's it, the next time you restart commview it will use the selected adapter.

Courtesy of Enigma

Now let's get down to business.

The Method - Easy and Simple

Well this is a simple way to hack the network. 

It will only require a single computer with wireless adapter, but it does take a somewhat good amount of time to get the job done.

Step one - Find the network and initiate scanning

Click the PLAY icon in the upper left corner. A new window will popup and you should click the 'Start scanning' button.

Now click the network you would like to crack and press the 'Capture' button.

The window will close and you will now begin capturing packages.

You will need A LOT of packages to crack the password. I suggest you wait until you have 500,000 - 1,000,000 packages. You can stop the scanning at this point.

Step two - The actual cracking

Now, go back to the 'Logging' tab and click 'Concatenate Logs'. Choose all the files and concatenate them in to a single file. Save it somewhere you can remember.

Click on File -> Log Viewer -> Load Commview Logs(this opens a new window) -> Choose the .ncf file you just made.

Now click File ->Export -> Wireshark/TCP dump format, and save it someplace you won't forget.

Last step: Open the Aircrack Folder->Bin->Aircrack-ng GUI.exe

Choose the .CAP file you just made and insert the MAC address of your network in the BSSID field. Then begin the cracking!

If it was unable to find the password, then you will need to try again with more packages. Again, it takes A LOT!

That is it for now. Please post any suggestions or questions you may have. And of course, a little thank you will go a long way!

By: Ranjan bawa On 9:11 PM

Continue Reading

How To crack wireless passwords with net tools 5

Go To Download Net Tools

Get Into any Wireless Network with, Net tools 5.

Have Wireless signals in your area? but cant use them cuz they have security? This Tut will tell you how too use nettools 5 to get into them,

First you need too see what wireless networks are in your area,

this is pretty simply first, 

Open Control Panel...



Then view network status and tasks,



Then click on manage wireless networks,



Once you find what kinda security it has, as high lighted below, open nettools



NetTools Side of TuT,



Once you have nettools open, then, Start> Network Tools> WEP/WPA Key Generator, it should look like it is below,



Once Open, select the type of security that the Wireless network your trying to get into has, then select "Hex (0-9,A-F)",



Now you Need too select a Key Length, the best one too use is, 64/40 bits, once you have done that,Be sure to click on the Calculate Key Space,



Now simply hit Generate Code, and your code will appear,



Now simply copy and paste that into the password bar, when prompt to, when your connecting too the Wireless signal,




Then press ok and you're connected to the internet.

By: Ranjan bawa On 10:40 PM

Continue Reading